Back to product search

Micronics UF-DS200 Doppler Flow Switch

The Micronics UF-DS200 Doppler Flow Switch is an ultrasonic sensor. This instrument injects high frequency sound through the pipe wall and into the moving fluid where acoustic pulses are reflected back to the sensor from particles or bubbles in the fluid. It controls flow without any drop in pressure, no sensor fouling and minimal maintenance. Installation takes just a few minutes because there is no need to cut into pipes resulting in a major saving in time and plant outage.

 

The UF DS200 Flow Switch is housed in a watertight NEMA4X fiberglass enclosure and requires a 115VAC power supply. The flow measurement range is 0.25 to 10 ft/second (0.076 to 3 m/sec).

 

Micronics UF-DS200 Doppler Flow Switch specifications…

  • SE4 sensor – clamp-on ultrasonic for 0.5” to 180” (12.5 mm to 4.5 m) ID pipes
  • Sensor cable – 20 ft / 6 m shielded coaxial pair
  • Installation – Silicone coupling compound
  • PCK2 stainless steel Pipe Clamp Kit for 0.5-16” / 12.5-406 mm OD pipes
  • Enclosure – watertight, dust-tight NEMA4X (IP67) polycarbonate
  • 1 Relay – 5 ampere DPDT
  • Set point – On/Off adjustment 0.25 – 10 ft/sec (0.076 – 3 m/sec)
  • Relay time delay – adjustable, 0-80 seconds
  • Indication – Relay LED, Flow rate LED Bar Graph
  • Power input – 100-240VAC 50-60Hz

 

Micronics Clamp-on Flow Switches provide cost effective solution for sewage treatment companies. It suitable for pump protection or to activate flow/no flow alarms.

 

Fluidic are a recognised partner of Micronics Instrumentation for Scotland and the North of England.  Our instrumentation engineers are product trained and are able to help with instrument selection within the full Micronics supply of ultrasonic clamp-on flowmeters.   Please call either office for more information (Glasgow 0141 641 5920,  Warrington 01925 572401).

 

Downloads

Enquire about this product
Your Name *
Please call either office for more information:
preloader