Moore Industries SPA2 Trip Amplifiers
Versatile programmable limit alarm trip, warns of unwanted process conditions.
The SRM Safety Relay Module is part of the Moore Industries FS FUNCTIONAL SAFETY SERIES. It is exida certified for single use in a Safety Instrumented System up to SIL 2. The SRM is a relay repeater model that accepts a single contact closure input from a logic solver trip output, such as the Moore SPA2 or STA, and provides three contacts per alarm input, allowing you to add alarm contacts for your safety processes without special installation or configuration.
The SRM is built using a safety-rated relay with forcibly-guided contacts. This is unlike traditional multi-output off-the-shelf interposing relays. This design is commonly used in control and safety systems where the logic of an application needs to detect the state of the output contacts. This is achieved by monitoring the state of the monitor contact that is also mechanically linked to the same armature as the output contacts.
A Force Guided Relay avoids the possibility of having contacts stuck in the Normally Open (NO) and Normally Closed (NC) states at the same time. Also known as a Positively Guided Relay, the Force Guided Relay assures users that mechanical
problems such as welded contacts won’t be missed.
The SRM is housed in a DIN case that can be mounted on 35mm Top-Hat DIN-rail. The aluminium housing is more rugged and durable than safety relays housed in a plastic case.
• exida certified IEC 61508
• Comprehensive FMEDA certified safety data
• Visual diagnostic information
• Easy to install and configure
• Input Snubber
• Fuse protection
• RFI/EFI protection
Front-panel LEDs provide diagnostic information, with three LED indicator lights. The LEDs show the Input, Output and Power status. The panels provide an instant visual diagnostic on the SRM. This allows users to quickly see if there are any potential problems.
Fluidic are a recognised partner of Moore Industries for Scotland. Our instrumentation engineers are product trained and are able to help with instrument selection within the full Moore Industries supply scope. Please call either office for more information (Glasgow 0141 641 5920, Warrington 01925 572401).
