Status SEM1801 and SEM1802 Temperature Transmitters (ATEX)

Status SEM1801 and SEM1802 DIN Rail Temperature Transmitters take a raw signal from RTD or thermocouples and provide a conditioned 4-20mA output.  The SEM1801 device is a single input whereas 2 inputs and outputs are available on the SEM1802 versions.  Status SEM1801 and SEM1802 DIN Rail Temperature Transmitters are 2 wire, loop powered instruments and compliant with ATEX Exia regulations for installation within the hazardous area.  (Note that, although these instruments include IO isolation, they are not suitable for use as an ATEX “barrier”.  Contact Fluidic for your barrier requirements).

Status SEM1801 and SEM1802 are available in 2 sub models.  The SEM1801RX and SEM1802RX are suitable for RTD devices (including Pt100) and potentiometer inputs.  SEM1801TCX and SEM1802TCX for thermocouple.  Specifically K/J/N/E/T/R/S/L/U/B/C/D/G thermocouples.

Utilising the casings of the SEM1700 series, these DIN rail mounted temperature transmitters have a 22mm width.  Installation is to the “top hat” DIN rail standard (EN 50022) and designed to withstand multiple replacements during assembly.

Status SEM1801 and SEM1802 features summary:

• ATEX compliance to Ex ia IIC T4 Ga, Ex ia IIIC T135 Da
• IECEx compliance to Ex ia T4 Ga, Ex ia IIIC T135 Da
• Dual IO capacity on SEM1802 series
• SEM1801RX & SEM1802RX for RTD input
  • Pt100, Pt500, Pt1000, Ni100, Ni120, Ni1000,Cu53, Cu100, Cu1000
• SEM1801TCX & SEM1802TCX for thermocoupe input
  • K/J/N/E/T/R/S/L/U/B/C/D/G
• PC configurable via free of charge software
• 2 wire, loop powered design
• Dims: 120 mm deep, 107.3 mm height, 22.5 mm wide

Fluidic are a recognised partner of Status Instruments for Scotland and the North of England.  Along with the above DIN rail mounted temperature transmitters we offer head mounted transmitters and a range of signal conditioning instrumentation.  Our instrumentation engineers are product trained and are able to help with instrument selection within the full Status Instruments supply scope. Please call either office for more information (Glasgow 0141 641 5920,  Warrington 01925 572401).